KFM
KFM - Control Valves for Water, Steam and Heat Transfer Oil
Founded 1969, KFM Regelungstechnik GmbH is primarily involved with control and regulation in industrial heating and process engineering in almost all sectors of industry, including shipbuilding. Both electronic controllers and control valves are supplied, so that, if necessary, the entire control system can be obtained from on source. lf desired, this can also include qualified consultation and advice on control technology.
Control Valves for Water and Steam
KFM Two Way Control Valves
with Electric Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Two Way Control Valves
with Pneumatic Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Three Way Control Valves
with Electric Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Three Way Control Valves
with Pneumatic Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
Control Valves for Heat Transfer Oil
KFM Two Way Control Valves
with Electric Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Two Way Control Valves
with Pneumatic Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Three Way Control Valves
with Electric Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Three Way Control Valves
with Pneumatic Actuator
| Press. Rating : | PN 16/25/40 |
| Temp. : | Up to 450 ºC |
| Sizes : | DN 15 to 200 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
Special Valves for Specific Applications
KFM Motor Control Valves
with Emergency Close Function
| Press. Rating : | PN 16/25 |
| Temp. : | Up to 350 ºC |
| Sizes : | DN 15 to 100 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Motor Control Valves
with Emergency Close Function
| Press. Rating : | PN 16/25 |
| Temp. : | Up to 350 ºC |
| Sizes : | DN 15 to 100 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Motor Control Valves
with Emergency Close Function
| Press. Rating : | PN 16/25 |
| Temp. : | Up to 350 ºC |
| Sizes : | DN 15 to 100 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |
KFM Motor Control Valves
with Emergency Close Function
| Press. Rating : | PN 16/25 |
| Temp. : | Up to 350 ºC |
| Sizes : | DN 15 to 100 |
| Options : | Weld-on ends, Flange drillings to ANSI/JIS |